• 联系人:小马师傅
  • 电话:18560041881
  • 地址:济南市北园大街86号
新闻中心当前位置:首页-新闻中心
    来源:http://www.jndmzp.com/   时间:
    自流平地面正确做法是什么?
    来源:http://www.jndmzp.com   时间:2020-5-28 17:23:01

      很多小伙伴儿都对自流平比较陌生,其实很多家装设计前都需要做自流平来进行地面找平,今天小编就自流平来详细介绍一下,我们可以结合自己的具体地面情况来选择是否需要进行自流平施工。
      A lot of young people are unfamiliar with self leveling. In fact, a lot of home furnishings need to do self leveling to level the ground before design. Today's editor-in-chief introduces self leveling in detail. We can choose whether to carry out self leveling construction according to our specific ground conditions.
      其实自流平就是将自流平材料加入清水进行搅拌后然后将自流平材料液体倒入凹凸不平的地面上,它会迅速的向地面上低洼的地方流去填满,从而会让您的地面变得平整,方便您后期进行地面铺设,还能有效的预防地面返潮和后期我们行走在上面出现杂音等等。由于自流平是由多种活性成分组成的干混型粉状材料,现场拌水即可使用。将它倒在地面上的时候可以用刮刀轻轻展开就可获得高平整基面了。由于自流平自身硬度比较高,我们经过8小时以上的自然风干后就可以在自流平上行走了。确定自流平地面干透之后我们就可以进行后面的施工流程了。

     
      In fact, self leveling is to add the self leveling material into the clear water for mixing, and then pour the self leveling material liquid into the uneven ground, which will quickly flow to the low-lying place on the ground to fill up, so that your ground will become flat, convenient for you to lay the ground later, and effectively prevent the ground from returning to the tide and the noise when we walk on it later. Since self leveling is a kind of dry mixed powder material composed of various active ingredients, it can be used by mixing water on site. When it is poured on the ground, it can be gently spread out with a scraper to obtain a high leveling base surface. Due to the high hardness of the self leveling, we can walk on the self leveling after more than 8 hours of natural air drying. After confirming that the self leveling ground is dry, we can carry out the following construction process.
      再来说一下自流平的正确的施工流程,首先在我们决定做自流平之后要先检查房子中地面的湿度,一定要确保地面是干燥的,还要检查一下原地面中是否有开裂的地方,确定无误后我们要将地面进行彻底的清洁,将地面上的尘土和装修油漆污渍等等都清扫干净,对原地面进行简单的打磨,然后用吸尘器将地面上灰尘彻底吸净。先将界面剂与水1:1混合后均匀的涂满地面,在自然风干2—4小时完全干透后,在进行自流平地面施工。先将自流平水泥倒入盛有清水的搅拌桶内,用带浆电钻进行搅拌,直至形成流态均匀的混合物。必须确保无结块。然后迅速的将混合物均匀倒入施工区域,用刮刀将自流平均布,并用滚筒进行来回滚拉,将自流平内部空气释放出来。在经过24小时自然风干后,确定自流平水泥完全干燥后3天可进行地面材料铺设。
      Let's talk about the correct construction process of self leveling. First, after we decide to do self leveling, we should check the humidity of the floor in the house, make sure that the floor is dry, and check whether there is any crack in the original floor. After we make sure that there is no mistake, we should thoroughly clean the floor, clean the dust on the floor and paint stains on the decoration, etc The original ground is simply polished, and then the dust on the ground is completely sucked by the vacuum cleaner. First, mix the interface agent and water 1:1, and then evenly coat the ground. After the natural air drying for 2-4 hours, the construction of self leveling ground will be carried out. First, pour the self leveling cement into the mixing bucket filled with clear water, and mix it with the electric drill with slurry until the mixture with uniform flow state is formed. It must be ensured that there is no caking. Then quickly pour the mixture into the construction area evenly, use a scraper to evenly distribute the self flowing cloth, and use a roller to roll back and forth to release the air inside the self leveling. After 24 hours of natural air drying, it is determined that the ground material can be laid 3 days after the self leveling cement is completely dry.

鲁公网安备 37148202000237号