• 联系人:小马师傅
  • 电话:18560041881
  • 地址:济南市北园大街86号
新闻中心当前位置:首页-新闻中心
    来源:http://www.jndmzp.com/   时间:
    济南自流平地坪漆涂装工具”辊筒“的使用技巧
    来源:http://www.jndmzp.com   时间:2013-10-31 11:31:22
    辊筒是一根空心圆筒,普通辊筒表面粘贴羊毛或合成纤维制成的长毛绒。普通辊筒的筒套绒毛长度有长、中、短三种规格。中、长绒毛辊筒的筒套沾附的涂料多,适用于粗糙物面,辊涂地坪涂料时多采用这两种辊筒。
    The roller is a hollow cylinder, made of ordinary roller surface of wool or synthetic fiber plush. Ordinary roller sleeve of villus length in short, long, three kinds of specifications. In, plush roller sleeve attached to the coatings, suitable for rough surface, with the two roller roller coating floor paint.
    辊筒的种类和规格很多,异形辊筒可涂成各种花纹形态的水泥自流平地坪漆涂膜,如皱面防滑济南自流平的施工,常用这类辊筒施工。如有需要,寻则购买相应的辊筒即可,其使用与普通辊筒类似,不在赘述。
    Types and specifications drum shaped roller can be many, painted various patterns of cement self leveling floor coatings, such as wrinkle construction surface antiskid Ji'nan self leveling, commonly used this kind of roller construction. If necessary, seek to buy roller can be correspondingly, its use is similar to an ordinary roller, do not go into details.
    (1) 辊筒的使用
    (1) the use of roller
    辊筒在使用前应反复清理和抖动,清除残余的毛屑和粉尘,辊涂济南自流平时一般要在手柄上加装长度适合的竹竿、木棒等长柄,以便较大范围涂装。新辊筒用稀释剂清洗一下,甩干稀释剂后再蘸取涂料施工较好。
    The roller in use should be repeated cleaning and jitter, remove the residual hair debris and dust, roller coating Ji'nan gravity usually is suitable for a length of bamboo, wooden long handle, to a wide range of coating. The new roller with thinner to clean, dry after dipping paint thinner good.
    使用过的滚筒,若需短时间再用,可简单清洗后,浸泡在稀释剂或单组份涂料中,济南自流平工程完成后,应用稀释剂将其清洗干净。侵袭方法是:用刮刀等刮下占附的涂料,在稀释剂中浸透,在废纸等干净服务商滚动,挤出漆液和稀释剂,如此反复几次,直至露出绒毛本色,甩干筒套,把互相缠结的绒毛弄松即可存放。
    Roller used for a short time, then, can be simply washed, soaked in thinner or single component coatings, Ji'nan self leveling project is completed, the application of clean. Invasive method is: use scraper scraping account for paint, soaked in thinner, rolling in the paper and other clean service providers, extrusion coating and thinner, so repeated several times, until the appearance of hair color, dry cylinder sleeve, the intertwined fluff loose can be stored.
    (2) 辊涂方法
    (2) roller coating method
    先用辊筒的1/3~1/2浸入配制好的涂料中,在容器内壁上滚动,使辊筒浸透涂料,同时挤出多余的涂料。按W形轻轻地滚动,将涂料大致分布在地板上,先顺一个方向辊涂,带辊筒上的涂料基本用完时,再沿垂直方向辊涂。把厚薄不均的济南自流平涂料赶干,直至薄厚均匀为止。辊涂一道面涂时,应按同一方向(如光线照射的方向)辊涂。
    First with the roller 1/3~1/2 immersed in the prepared coating, rolling in the inner wall of the container, so that the roller with paint, and squeeze out excess paint. According to W shape gently rolling, will paint broadly distributed in the floor, first along the a direction of roller, belt roller coating basically run out, and then along the vertical direction of the roller coating. The uneven thickness of the Ji'nan self leveling coatings stem, and uniform thickness. Roller coating a surface coating, should according to the same direction (such as illumination direction) roll coating.
    辊涂济南自流平 http://www.jndmzp.com/ 地面的要求是:不堆、不漏、不露辊痕和接头。
    Roller coating Ji'nan self leveling floor requirement is: not heap, do not leak, do not reveal the roll mark and joint.

鲁公网安备 37148202000237号