• 联系人:小马师傅
  • 电话:18560041881
  • 地址:济南市北园大街86号
新闻中心当前位置:首页-新闻中心
    来源:http://www.jndmzp.com/   时间:
    金刚砂耐磨地坪对找平层的要求
    来源:http://www.jndmzp.com   时间:2015-2-26 23:07:05
    1、金刚砂耐磨地坪对有钢筋要求的地台,应按设计设置钢筋或铺设网眼孔径为5㎝×5㎝的钢网,钢筋或钢网下面设置垫块。
    1, carborundum wearable Floor of reinforced requirements of the platform should be designed according to the set, or the laying of steel mesh reinforcement mesh aperture of 5 cm x 5 cm, steel or steel mesh is arranged below the cushion block.
    2、金刚砂耐磨地坪工前应将所需施工地面均匀淋洒水泥油,以防止找平层起壳。
    2, emery wear-resisting flooring industry should be needed construction ground evenly sprinkling Cement oil, to prevent the leveling layer shell.
    3、需要分仓按序进行,以保证整体地面水平硬化层的机器作业。
    3, needs to divide the warehouse according to the order, to ensure the whole ground level hardening layer of the machine operation.
    4、金刚砂耐磨地坪二次作业之混凝土找平层,基厚度不低于4㎝。
    Concrete leveling layer 4, carborundum wearable Floor two operations, base thickness of not less than 4 cm.
    5、由于地面进行分仓作业,应在每仓边缘架设标高钢模或木模板,以确保表面水平度。
    5, because the ground is divided into warehouse operation, should the erection elevation of steel or wood template in each bin edge, to ensure the surface level.
    6、在浇注混凝土作业时,需用震动桥或水平式震动器对混凝土进行震实作业。
    6, in the pouring of concrete operations, with shaking bridge or horizontal type vibrator for concrete vibrating operation.
    7、使用较重的钢制长辊对混凝土进行辗压,使地面达到初平,并用胶管去除多余泌水后,便可交予我方进行硬化剂施工。
    7, the use of heavier steel to concrete long roller rolling, causes the ground to reach the initial flat, with hose and remove excess bleeding, can be given to our construction of sclerosing agent.

鲁公网安备 37148202000237号