• 联系人:小马师傅
  • 电话:18560041881
  • 地址:济南市北园大街86号
新闻中心当前位置:首页-新闻中心
    来源:http://www.jndmzp.com/   时间:
    环氧树脂自流平地坪发花的原因
    来源:http://www.jndmzp.com   时间:2015-12-8 16:31:10
    1、表面有小气泡,整体颜色深浅不一致,地坪局部出现发白。
    1, the surface of small bubbles, the overall color is not the same, the emergence of local white floor.
    这主要是因为环氧自流平的材料消泡能力差,可选择更强的消泡剂进行消泡处理,同时可以调整填料和活性稀释剂的比例,减少填料,增加火星稀释剂;再者选择黏度小,但固化时间长的固化剂
    This is mainly because of the poor ability of epoxy self leveling material, can choose a stronger anti foaming agent for treatment, and can adjust the proportion of fillers and reactive diluent, reduce the filler, increase the Martian thinner; moreover, the choice of viscosity is small, but the curing time is long curing agent
    2、出现局部颜色不一。
    2, there is a partial color.
    环氧树脂自流平材料配置时使用杂牌树脂,导致对颜料分散系统造成干扰。
    The use of brand-name configuration resin epoxy self leveling material, cause interference on pigment dispersion system.
    3、灰色的材料容易发花
    3, gray material easily dazzled
    颜料中钛白比较重,碳黑轻,这导致在配置灰色的材料时,两种颜色颗粒由于重量的原因出现分层。一般要求一份黑他碳需要一分助剂,大约两分环氧和两份活性稀释剂来配制色浆,一般研磨三遍以上。
    Pigment titanium dioxide is relatively heavy, carbon black is the lightest, which leads in the grey of the materials, two kinds of color particles due to the weight of the delamination. General requirements for a black he carbon additives, about two epoxy and two reactive diluent to the preparation of paste, general grinding three times.
    本文由济南地面找平友情奉献.更多有关的知识请点击http://www.jndmzp.com我们将以真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
    This article is contributed by the Jinan ground leveling friendship. More knowledge about please click http://www.jndmzp.com we will with the most sincere attitude. To provide you with the most comprehensive services. More relevant knowledge and we will continue to everyone dedication. Stay tuned.

鲁公网安备 37148202000237号