• 联系人:小马师傅
  • 电话:18560041881
  • 地址:济南市北园大街86号
新闻中心当前位置:首页-新闻中心
    来源:http://www.jndmzp.com/   时间:
    环氧地坪水泥地基建设标准有哪些?
    来源:http://www.jndmzp.com   时间:2016-11-4 17:32:16
    含水率:混凝土表面济南环氧地坪水分含量应小于8%,高含水率的基础通过室内温度和通风增加空气流通速度采取具体水。
    Water content: the concrete surface of Ji'nan epoxy floor moisture content should be less than 8%, the basis of high water content through indoor temperature and ventilation to increase the air flow rate to take concrete water.
    磨削表面应打磨济南环氧地坪:修复表面,和水泥的根除挖空;基面:水泥砂浆冗长的低洼的本地应用程序,并让地面保持一定的粗糙度;清洁剂:后清洗地面水泥沙子和灰尘,保持地面清洁,可以使用吸尘器或清洗地面。
    The grinding surface should be polished Ji'nan epoxy floor repair surface, and cement mortar surface: the eradication of hollowed out; lengthy low-lying local application, and let the ground to maintain a certain roughness; cleaning agent: final cleaning ground cement sand and dust, keep the ground clean, you can use a vacuum cleaner or cleaning the floor.
    楼的建设,通济南环氧地坪常在5 ~ 35的温度。自动安平涂料粘度大大受到温度的影响,自动安平涂料合适的低温粘度在高温涂料将过低粘度和困难的建设。自动安平涂料在高温低温下合适的粘度太厚,很难抓,和平整的表面是不济南环氧地坪容易的。如果真空喷涂方法,温度的影响相对较小。你可以得到好的结果在适当的温度。
    Floor building, through the Ji'nan epoxy floor often in 5 ~ 35 of the temperature. Automatic coating viscosity is greatly affected by temperature, automatic coating suitable for low temperature viscosity at high temperature and low viscosity coating construction difficult. Automatic coating in high temperature and low temperature under suitable viscosity is too thick, it is difficult to grasp, and smooth surface is not easy to Ji'nan epoxy floor. If the vacuum spray method, the effect of temperature is relatively small. You can get good results at the appropriate temperature.
    本文的精彩内容由济南地面找平提供,多的内容请点击我们的官方网站:http://www.jndmzp.com或者来电咨询。
    Wonderful content in this paper is provided by the Ji'nan ground leveling, more information please click our website or contact us: http://www.jndmzp.com.

鲁公网安备 37148202000237号